Boiler Supply represents a wide range of indirect-fired and condensing water heaters for commercial buildings applications.
Camus DynaFlo Indirect Water Heater
The DynaFLO is a compact prepackaged domestic hot water system that has the highest outlet temperature accuracy as well as one of the smallest footprints in the industry.
15 different models ranging up to 340 GPM of domestic hot water (DHW) at 60°F Delta T
Camus TH Condensing Water Heater
The Tank Heater series is a gas-fired condensing water heater featuring a stainless steel heat exchanger rated at 160 PSIG maximum allowed working pressure and storage tank with a 10-year warranty.
200,000 to 500,000 BTU/H
up to 92% efficiency
Extremely low NOx level
Camus VTech Condensing Water Heater
The VTech is designed to perform at the highest levels of efficiency using modern condensing technology with the lowest emissions of any Water Heater in the industry. Because it’s manufactured using an all stainless steel construction, the fully modulating VTech is impervious to corrosion.
60-115 gallons / 80,000 – 499,000 Max Input
AHRI Efficiencies of up to 96%
160 PSIG M.A.W.P. stainless steel storage tank
Camus Volume Water Heater
Avenger: Models range from 1,000 up to 4,000 MBH, Modulating burner with up to 25:1 turn-down
Dynaflame: 500,000 BTU/hr up to 6 million BTU/hr
DynaForce: 300,000 BTU up to 5 million BTU with a turndown ratio of up to 5:1.
DynaMax: 194 – 776 MBH max output (wall and floor mount models)
Varies by model
Parker Boiler Indirect Fired Water Heater
The Parker WH model water heater is constructed with 316 stainless steel waterways and is an ideal choice for low or high-temperature applications. The advantage is that the furnace remains at a steady uniform temperature which results in a high combustion efficiency and lower fuel consumption.
300 – 3,000 MBTU
For large volumes of domestic or process water for commercial or industrial applications. Ideal for: laundries, hotels, apartments, food processing, hospitals, schools, swimming pools and radiant heating.
Up to 80%
< 12 ppm at 3% O2
Thrush Hot Pak Instantaneous Hot Water Heaters
Instant hot water is a necessity for hospitals, universities, hotels, and countless commercial and industrial facilities. Thrush Hot-Pak® is a pre-engineered system that provides the continuous supply of hot water you need without the expense of large storage tanks. The compact, state-of-the-art water heater is available in:
- Single or double-wall designs
- Horizontal or vertical designs
- Control Panel options
Combined with duplex stainless steel or premium copper-nickel construction, the Hot-Pak® system provides superior corrosion resistance, better temperature control, and higher energy efficiency.
Thrush Heat Exchangers
With heat exchangers being one of the most important parts of heating and cooling process operations for industries, you need consistent high performance and reliability. Thrush shell and tube heat exchangers are engineered to meet various HVAC applications:
- Heating and cooling liquids for process systems
- Heat recovery to improve energy efficiency
- Comfort systems using steam or liquids
Thermo 2000 Turbomax Reverse Indirect Water Heater
The Turbomax, Thermo 2000’s instantaneous indirect hot water heater, is the ideal solution for domestic water heating in residential, commercial and institutional applications. It instantly heats potable water upon demand—from40 °F to 140 °F in less than 7 seconds.
Watch to learn more
Cleaver-Brooks HxO Heat Exchanger
The HxO is designed to provide instantaneous Domestic hot water supply to your building without the need for additional fuel-fired or electric heating equipment. By utilizing your new or existing hotwater heating loop, the HxO will provide on-demand water for your system. ASME certified, CRN approved, NSF 372 certified and Stainless Steel Brazed plate design.
Up to 10,000 MBH
Niles Hot Water Generators
Niles Steel Tank manufactures hot water storage tanks lined with our exclusive Ultonium glass lining. Also available is our Defender Epoxy suitable for temperatures up to 180 degrees F.
- Vertical or horizontal configurations
- 125 psi standard, 150 and 160 psi optional
- Manways over 36” diameter
- 3” NPT circulation fittings
- ASME IV, Part HLW
Video: Niles Products
Niles Storage Hot Water Generators
Niles Steel Tank’s hot water generators are designed for durability and efficiency. Utilizing steam or hot water as the power source, Niles Steel Tank can size and design the correct system for your application.
-2 or 4-pass, single or double-wall construction
-vertical and horizontal configurations
-all tank fittings can be NPT, flanged or grooved end
-epoxy lined for potable water applications up to 180°F & 160 PSI max
We can help – Contact Us